
- Overview Overview The U-Style Raft Motor Mount by NRS places the motor far enough from the raft's stern for easy operation of the control handle. Made from heavy-duty 1-5/8 inch OD 6061-T6 aluminum pipe, it is a goo...
- Technical Specifications Technical Specifications
SKU: ARA_NSMOTORU
MPN: 93117.01.100
The U-Style Raft Motor Mount by NRS places the motor far enough from the raft's stern for easy operation of the control handle. Made from heavy-duty 1-5/8 inch OD 6061-T6 aluminum pipe, it is a good choice when you have a heavy motor. The curved bars rest against the raft's tubes to support the weight. The wide transom plate is made of a wood/plastic composite decking material that will not rot or deteriorate when exposed to water and sun. It is backed with two pieces of aluminum channel to increase the grip on the upright pipe sections, while four oversize U-bolts hold the transom plate firmly in place. Always attach a safety rope or strap from your motor to the frame. When you want to run your motor, you need the NRS U-Style Raft Motor Mount.
- This mount is also a good choice when you have a heavy motor
- The curved bars resting against the raft's tubes support the weight
- Fits raft tubes 18 to 24 inches in diameter
- Wood/plastic composite decking transom plate
- Heavy-duty 1-5/8-in OD 6061-T6 aluminum pipe to make the framework for the Motor Mount
- You can install your Motor Mount on either side of the seat plate
- If you do not have a Stern Seat Mount you will need a pair of NRS Stern Side Rails (sold separately)
- The bars, where they attach to the transom plate, are 14 inch apart, center-to-center
- The distance from the center of the attachment bar to the center of the upright bars is 25 inch
- The transom plate can be mounted on either side of the uprights, and adjusted up and down as needed
- Always attach a safety rope or strap from your motor to the frame
Please Note: Needs Stern Seat Mount (sold separately)
Technical Specifications
Material | 1 5/8" 6063-T6 Anodized Aluminum Frame Pipe |
Weight | 17 lbs. |
A | B | C | Transom Plate |
25" | 13 7/8" | 11" | 1 1/2" x 7 1/2" x 18" |
Tips: The Raft Motor Mount needs the Motor Mount Stern Side Rails, item #90022.02, (or a Stern Seat Mount item #92017.03) to attach to your main frame. These are sold separately.
Overview
Product title: NRS U-Style Raft Motor Mount
SKU: ARA_NSMOTORU
MPN: 93117.01.100
The U-Style Raft Motor Mount by NRS places the motor far enough from the raft's stern for easy operation of the control handle. Made from heavy-duty 1-5/8 inch OD 6061-T6 aluminum pipe, it is a good choice when you have a heavy motor. The curved bars rest against the raft's tubes to support the weight. The wide transom plate is made of a wood/plastic composite decking material that will not rot or deteriorate when exposed to water and sun. It is backed with two pieces of aluminum channel to increase the grip on the upright pipe sections, while four oversize U-bolts hold the transom plate firmly in place. Always attach a safety rope or strap from your motor to the frame. When you want to run your motor, you need the NRS U-Style Raft Motor Mount.
- This mount is also a good choice when you have a heavy motor
- The curved bars resting against the raft's tubes support the weight
- Fits raft tubes 18 to 24 inches in diameter
- Wood/plastic composite decking transom plate
- Heavy-duty 1-5/8-in OD 6061-T6 aluminum pipe to make the framework for the Motor Mount
- You can install your Motor Mount on either side of the seat plate
- If you do not have a Stern Seat Mount you will need a pair of NRS Stern Side Rails (sold separately)
- The bars, where they attach to the transom plate, are 14 inch apart, center-to-center
- The distance from the center of the attachment bar to the center of the upright bars is 25 inch
- The transom plate can be mounted on either side of the uprights, and adjusted up and down as needed
- Always attach a safety rope or strap from your motor to the frame
Please Note: Needs Stern Seat Mount (sold separately)
Technical Specifications
Material | 1 5/8" 6063-T6 Anodized Aluminum Frame Pipe |
Weight | 17 lbs. |
A | B | C | Transom Plate |
25" | 13 7/8" | 11" | 1 1/2" x 7 1/2" x 18" |
Tips: The Raft Motor Mount needs the Motor Mount Stern Side Rails, item #90022.02, (or a Stern Seat Mount item #92017.03) to attach to your main frame. These are sold separately.